NHSE Guides

𝙃𝙤𝙬 𝙩𝙤 𝙁𝙡𝙖𝙩𝙩𝙚𝙣 𝙄𝙨𝙡𝙖𝙣𝙙 𝙫𝙞𝙖 𝙉𝙃𝙎𝙀

•Put SD card into Computer
•Open 𝙉𝙃𝙎𝙀
•Open folder: JKSV>Animal Crossing New Horizons>(𝘚𝘢𝘷𝘦 𝘧𝘪𝘭𝘦 𝘺𝘰𝘶 𝘸𝘢𝘯𝘵 𝘵𝘰 𝘌𝘥𝘪𝘵; “𝙢𝙖𝙞𝙣.𝙙𝙖𝙩”)
•NHSE will then open a separate window with your Island & Player info
•Select “𝙈𝙖𝙥” tab, “𝙀𝙙𝙞𝙩 𝙈𝙖𝙥”, then “𝙀𝙙𝙞𝙩 𝙁𝙞𝙚𝙡𝙙 𝙄𝙩𝙚𝙢𝙨”
•On “𝙄𝙩𝙚𝙢𝙨” tab: Under “𝙏𝙞𝙡𝙚 𝙀𝙙𝙞𝙩𝙤𝙧 𝙈𝙤𝙙𝙚”, Select “𝙄𝙩𝙚𝙢𝙨”; Hold 𝐒𝐡𝐢𝐟𝐭 𝐊𝐞𝐲 while selecting “𝙍𝙚𝙢𝙤𝙫𝙚 𝙄𝙩𝙚𝙢𝙨” > “𝘼𝙡𝙡”.
Do this for 𝙗𝙤𝙩𝙝 𝙇𝙖𝙮𝙚𝙧 𝟭 & 𝟮.
•Go to “𝙏𝙚𝙧𝙧𝙖𝙞𝙣” tab; Under “𝙏𝙞𝙡𝙚 𝙀𝙙𝙞𝙩𝙤𝙧 𝙈𝙤𝙙𝙚”, Select “𝙏𝙚𝙧𝙧𝙖𝙞𝙣”; Make sure all “𝙐𝙣𝙞𝙩𝙈𝙤𝙙𝙚𝙡” items on top right box say “𝘽𝙖𝙨𝙚”; Click “𝙈𝙤𝙙𝙞𝙛𝙮 𝘼𝙡𝙡” > “𝙕𝙚𝙧𝙤 𝙀𝙡𝙚𝙫𝙖𝙩𝙞𝙤𝙣” > Select “𝙔𝙚𝙨” at pop-up box.
•While still under “𝙏𝙚𝙧𝙧𝙖𝙞𝙣” tab, Click “𝙈𝙤𝙙𝙞𝙛𝙮 𝘼𝙡𝙡” again, Click “𝙎𝙚𝙩 𝘼𝙡𝙡 𝙏𝙞𝙡𝙚𝙨 𝙐𝙨𝙞𝙣𝙜 𝙏𝙞𝙡𝙚𝙨 𝙁𝙧𝙤𝙢 𝙏𝙝𝙚 𝙀𝙙𝙞𝙩𝙤𝙧”; Click “𝙔𝙚𝙨” at 1st pop-up box and “𝙉𝙊” at 2nd pop-up box (𝘳𝘦𝘨𝘢𝘳𝘥𝘪𝘯𝘨 𝘴𝘬𝘪𝘱𝘱𝘪𝘯𝘨 𝘦𝘹𝘵𝘦𝘳𝘪𝘰𝘳 𝘢𝘤𝘳𝘦𝘴/𝘣𝘦𝘢𝘤𝘩𝘦𝘴/𝘳𝘰𝘤𝘬𝘴)

𝗗𝝝𝗡’𝗧 𝗙𝝝𝗥𝗚𝗘𝗧 to click “𝙎𝙖𝙫𝙚” and then “𝙁𝙞𝙡𝙚” > “𝙎𝙖𝙫𝙚” 𝘼𝙂𝘼𝙄𝙉 in order for changes to take effect!

---

𝙃𝙤𝙬 𝙩𝙤 𝘿𝙪𝙢𝙥/𝙄𝙢𝙥𝙤𝙧𝙩 𝙈𝙖𝙥𝙨 𝙫𝙞𝙖 𝙉𝙃𝙎𝙀 (𝘛𝘳𝘢𝘯𝘴𝘧𝘦𝘳 𝘠𝘰𝘶𝘳 𝘐𝘴𝘭𝘢𝘯𝘥𝘴):

•Put SD card of switch/island you are wanting to 𝙩𝙧𝙖𝙣𝙨𝙛𝙚𝙧 𝙛𝙧𝙤𝙢 into your Computer
•Open 𝙉𝙃𝙎𝙀
•Open folder: JKSV>Animal Crossing New Horizons>(𝘚𝘢𝘷𝘦 𝘧𝘪𝘭𝘦 𝘺𝘰𝘶 𝘸𝘢𝘯𝘵 𝘵𝘰 𝘌𝘥𝘪𝘵; “𝙢𝙖𝙞𝙣.𝙙𝙖𝙩”)
•NHSE will then open a separate window with your Island & Player info
•Select “𝙈𝙖𝙥” tab, “𝙀𝙙𝙞𝙩 𝙈𝙖𝙥”, then “𝙀𝙙𝙞𝙩 𝙁𝙞𝙚𝙡𝙙 𝙄𝙩𝙚𝙢𝙨” •Under each tab (𝘐𝘵𝘦𝘮𝘴, 𝘉𝘶𝘪𝘭𝘥𝘪𝘯𝘨𝘴, 𝘛𝘦𝘳𝘳𝘢𝘪𝘯, 𝘈𝘤𝘳𝘦𝘴), keep “𝙏𝙞𝙡𝙚 𝙀𝙙𝙞𝙩𝙤𝙧 𝙈𝙤𝙙𝙚” on “𝙄𝙩𝙚𝙢𝙨”; then select “𝘿𝙪𝙢𝙥/𝙄𝙢𝙥𝙤𝙧𝙩” > “𝘿𝙪𝙢𝙥 𝘼𝙡𝙡 𝘼𝙘𝙧𝙚𝙨” (𝘋𝘶𝘮𝘱 𝘈𝘭𝘭 𝘉𝘶𝘪𝘭𝘥𝘪𝘯𝘨𝘴, 𝘋𝘶𝘮𝘱 𝘈𝘭𝘭 𝘈𝘤𝘳𝘦𝘴, 𝘵𝘩𝘦𝘯 𝘋𝘶𝘮𝘱 𝘈𝘭𝘭 𝘔𝘢𝘱 𝘈𝘤𝘳𝘦𝘴 – 𝘢𝘤𝘤𝘰𝘳𝘥𝘪𝘯𝘨 𝘵𝘰 𝘵𝘢𝘣 𝘰𝘳𝘥𝘦𝘳); Save these files on your computer appropriately.
•Then put SD card of switch/island you are wanting to 𝙩𝙧𝙖𝙣𝙨𝙛𝙚𝙧 𝙩𝙤 into your computer (𝘰𝘳 𝘫𝘶𝘴𝘵 𝘭𝘰𝘢𝘥 𝘵𝘩𝘦 𝘢𝘱𝘱𝘳𝘰𝘱𝘳𝘪𝘢𝘵𝘦 𝘴𝘢𝘷𝘦 𝘧𝘪𝘭𝘦).
•Open 𝙢𝙖𝙞𝙣.𝙙𝙖𝙩 folder inside 𝙅𝙆𝙎𝙑 folder
•Follow same steps, except instead of “𝘿𝙪𝙢𝙥𝙞𝙣𝙜”, you will be “𝙄𝙢𝙥𝙤𝙧𝙩𝙞𝙣𝙜”.

𝗗𝝝𝗡’𝗧 𝗙𝝝𝗥𝗚𝗘𝗧 to click “𝙎𝙖𝙫𝙚” and then “𝙁𝙞𝙡𝙚” > “𝙎𝙖𝙫𝙚” 𝘼𝙂𝘼𝙄𝙉 in order for changes to take effect!